Salta il contenuto
Ordinato entro le 16:00 - spedito il giorno stesso!
Ordinato entro le 16:00 - spedito il giorno stesso!

Nazione

RC MAKER "Type 2" Carbon Fiber Slimflex Topdeck 2.0mm for Yokomo MS1.0- - MS1.0-SFT20-2

SKU MS1.0-SFT20-2
Disponibilità:
Esaurito
Esaurito
Prezzo originale $0
Prezzo originale $21.00 - Prezzo originale $21.00
Prezzo originale
Prezzo attuale $21.00
$21.00 - $21.00
Prezzo attuale $21.00

Out of stock

Informazioni sulla spedizione

I prodotti con lo stato "in stock" saranno spediti il giorno stesso se ordinati entro le 14.00.

Informazioni

Per domande sul prodotto o informazioni dettagliate sul processo di ordinazione. Chiamateci!

Telefono: +41 44 500 84 66

Email: support@rcxx.shop

RC MAKER product description
We present our SlimFlex 2.0mm Carbon Topdeck “TYPE 2” for the Yokomo MS1.0
Based on the proven design of our extremely popular BD12 top deck, our successor top deck improves the handling of your MS1.0!
We now have two topdeck options available, and since the front and back are the same length, we now sell them individually so you can mix and match the front and back types, and also purchase separately to cut tabs and try out different flex settings.
TYPE 1- This type is more commonly used at the front, but on cars like the Mugen MTC2R it is common to use this type at the front and rear. It expands the amount of material which increases flex across the entire topdeck, which is desirable on the shorter MS1.0 topdecks. Although we recommend starting with this type at the front, it can also be used at the rear to get more flex and more rotation if you suffer from understeer.
TYPE 2 - This type is more commonly used in the rear as it has less flex and a shorter amount of material. It also features the "squiggly" brace which reduces bulkhead flex, which is often desirable in the rear. In high traction situations this topdeck can also work very well in the front as it stiffens the caster and bulkhead flex, resulting in a more predictable and rounded car in the corners.
The top deck has 2 rotary screw positions for adding or removing flex (1 screw soft, 2 screws hard) which is a great way to adjust the overall amount of flex in the front or rear of the vehicle. The top decks also have "cuttable" tabs that allow the flex point to be moved forward or backward. Cutting the tabs will increase the flex of the vehicle at that point.
On asphalt or grippy carpet, you can cut one or both front tabs depending on how much steering you want (more cuts = more steering). However, too much flex could make the car hard to drive, so cut the tabs one at a time.
On medium/high traction carpet tracks or very high traction asphalt, it may be desirable to leave all lugs in place to stiffen the car and make it easier to drive on the high grip.
Our SlimFlex topdecks are precision CNC machined in Australia from high quality 3K carbon fibre and come with 1x precision machined topdeck bolts that can be used to mount the front and rear topdecks (1 each).

spesso acquistati insieme

RC MAKER Slimflex 2.0 mm Topdeck Two-piece for Xray X4 (2) - X4-SFT20
Prezzo originale $47.00 - Prezzo originale $47.00
Prezzo originale
$47.00
$47.00 - $47.00
Prezzo attuale $47.00

RC MAKER Slimflex 2.0 mm Topdeck Two-piece for Xray X4 (2) - X4-SFT20

RC MAKER
2 in stock

Two-piece RC Maker Slimflex top deck for the Xray X4 touring car. With this two-part top deck from "Down Under Australia" you get another setup op...

Visualizza tutti i dettagli
Prezzo originale $47.00 - Prezzo originale $47.00
Prezzo originale
$47.00
$47.00 - $47.00
Prezzo attuale $47.00
RC MAKER Awesomatix A800MMX/MMXA & A800R SlimFlex Topdeck Set 2.0mm - SFT20
Prezzo originale $42.00 - Prezzo originale $42.00
Prezzo originale
$42.00
$42.00 - $42.00
Prezzo attuale $42.00

RC MAKER Awesomatix A800MMX/MMXA & A800R SlimFlex Topdeck Set 2.0mm - SFT20

RC MAKER
2 in stock

The RC Maker SlimFlex Topdeck was tested on asphalt, ETS carpet and CRC carpet and was a huge success everywhere. Drivers reported an easier car t...

Visualizza tutti i dettagli
Prezzo originale $42.00 - Prezzo originale $42.00
Prezzo originale
$42.00
$42.00 - $42.00
Prezzo attuale $42.00
RC MAKER Carbon Fiber End Plate for PRO Tweak Stick (various vehicles) - TSP-A800FX
Prezzo originale $26.00 - Prezzo originale $26.00
Prezzo originale
$26.00
$26.00 - $26.00
Prezzo attuale $26.00

RC MAKER Carbon Fiber End Plate for PRO Tweak Stick (various vehicles) - TSP-A800FX

RC MAKER
Solo 1 a sinistra!

RC Maker carbon fiber end plates for use with the new Pro Tweak Stick (RCM-TSP-S). The plates also fit the old models of the RC Maker Tweak Stick...

Visualizza tutti i dettagli
Prezzo originale $26.00 - Prezzo originale $26.00
Prezzo originale
$26.00
$26.00 - $26.00
Prezzo attuale $26.00
RC MAKER Geocarbon Carbon Fiber Rammer Plate FLEX for Awesomatix A800R - A800R-CBP
Prezzo originale $28.00 - Prezzo originale $28.00
Prezzo originale
$28.00
$28.00 - $28.00
Prezzo attuale $28.00

RC MAKER Geocarbon Carbon Fiber Rammer Plate FLEX for Awesomatix A800R - A800R-CBP

RC MAKER
2 in stock

RC Maker product description The new A800R is unique in that the rammer is attached directly to the bulkheads and relies on this mounting point t...

Visualizza tutti i dettagli
Prezzo originale $28.00 - Prezzo originale $28.00
Prezzo originale
$28.00
$28.00 - $28.00
Prezzo attuale $28.00
RC MAKER SlimFlex 2.2mm Carbon Fiber Chassis HARD for Awesomatix A800R - A800R-SFCH
Prezzo originale $107.00 - Prezzo originale $107.00
Prezzo originale
$107.00
$107.00 - $107.00
Prezzo attuale $107.00

RC MAKER SlimFlex 2.2mm Carbon Fiber Chassis HARD for Awesomatix A800R - A800R-SFCH

RC MAKER
Solo 1 a sinistra!

RC Maker Product Description: Introducing our brand new HARD Carbon Chassis for the Awesomatix A800R! This particular HARD version chassis featu...

Visualizza tutti i dettagli
Prezzo originale $107.00 - Prezzo originale $107.00
Prezzo originale
$107.00
$107.00 - $107.00
Prezzo attuale $107.00
}