MXLR

MXLR Driveshaft & Gear Oil - MAX-01-002 Driveshafts and Gears are under high load, which means at the same time this components are exposed to ...

MXLR Ball Bearing Oil - MAX-01-001 Friction is the natural enemy of performance. Ball bearings are the preferred remedy to reduce the friction of d...

MXLR AWESOMATIX A800R ShockVac - MAX-02-003 Our MXLR A800R ShockVac is a specially designed case which holds the new designed Awesomatix dampe...

MXLR ADJUSTABLE ALLOY SERVO ARM 25T - MAX-09-002 The servo arm plays an important role of the overall handling and feeling of your steering inpu...

MXLR FlexBumper for Awesomatix A800MMX & A800R - MAX-09-005 The MXLR FlexBumper is 3D printed with thermoplastic polyurethane for the optima...

MXLR Carbon Winglet 40x20mm (4) - MAX-05-001 Winglets are an important tuning possibility for every TC bodyshell. As they stiff up the side of the ...

MXLR Anti-Wear Grease - MAX-01-004 Drive train and suspension parts are under high stress in every RC vehicle, which means they face higher wear th...

 MAX-09-017 - FlexBumper for Awesomatix A12 WC Edition The WC Edition of our A12 FlexBumper is the final version of the test part that Max Mäc...

MXLR Precision Wing Mount Set - MAX-05-002 The wing position greatly affects the handling of your car. It's a powerful setup option to adjust your ...

MXLR Tungsten ESC Weight 20g (1) - MAX-03-005 The weight distribution of a car is one of the most powerful setup options that most racers overlook!...

MXLR Awesomatix Caster Tool - MAX-02-001 With the advanced suspension geometry of Awesomatix cars you can set caster, camber and toe by adjusting ...

MXLR Awesomatix Caster Tool (4) - MAX-02-001 With the advanced suspension geometry of Awesomatix cars you can set caster, camber and toe by adjust...

MXLR Front Body Support for Awesomatix A800R - MAX-09-013 With the trend of feather light bodyshells and even higher top speeds, deflection of body...

MXLR O-Ring Grease - MAX-01-003 O-Rings and seals are known to get either hard and brittle after some time, or swell up and generate excessive fric...

MXLR Setup System Caster correction (for HUDY 1/10 TC Alloy System) - MAX-07-007 We noted there are a few 1/10 TC setup systems out there which hav...

MXLR Tungsten Receiver Weight 12g (1) - MAX-03-003 The weight distribution of a car is one of the most powerful setup options that most racers over...

MXLR FlexBumper for Awesomatix A800FX - MAX-09-004 The MXLR FlexBumper is 3D printed with thermoplastic polyurethane for the optimal strength an...

MXLR Fan Holder for Awesomatix A12 (1) - MAX-09-019 This is the final version of the prototype that Max Mächler used for his World Cup victory in ...

MXLR Carbon Wing Mount plates (8) - MAX-05-003 The wing position greatly affects the handling of your car. It's a powerful setup option to adjust y...

MXLR Tungsten ESC Weight 15g (1) - MAX-03-004 The weight distribution of a car is one of the most powerful setup options that most racers overlook!...

MXLR Tungsten Balance Weight 5g (1) - MAX-03-001 The weight distribution of a car is one of the most powerful setup options that most racers overl...

MXLR Kingpin Screw for Awesomatix A12 (2) - MAX-09-014 Specially designed and milled screws for the Kingpin front axle of the Awesomatix A12. The...

 MAX-09-018 - Spacer set for A12 WC Edition FlexBumper Spacers spare part set for the A12 WC Edition FlexBumper which contains: 1x 1.0mm Spac...

MXLR ADJUSTABLE ALLOY SERVO ARM MAX-09-001 The servo arm plays an important role of the overall handling and feeling of your steering inputs. St...

MXLR LW Wing Bolts Set - MAX-05-004 It's important to keep the weight and by this the center of gravity as low as possible to achieve the best perf...

MXLR Tungsten Balance Weight 10g (1) - MAX-03-002 The weight distribution of a car is one of the most powerful setup options that most racers overl...