Passer au contenu
Commandé avant 16 heures - expédié le jour même !
Commandé avant 16 heures - expédié le jour même !

Pays

RC MAKER Xray X4 GeoCarbon Front Rammer Plate - X4-CBP

par RC MAKER
UGC X4-CBP
Disponibilité:
D'autres sont en préparation!
Épuisé
Prix d'origine $0
Prix d'origine $21.00 - Prix d'origine $21.00
Prix d'origine
Prix actuel $21.00
$21.00 - $21.00
Prix actuel $21.00

Coming soon

 Plus de moyens de paiement

Informations sur l'envoi

Les produits avec le statut "en stock" sont expédiés le jour même pour les commandes passées avant 14h00.

Information

Si tu as des questions sur le produit ou des informations détaillées sur le processus de commande. N'hésite pas à nous appeler !

Téléphone : +41 44 500 84 66

Email : support@rcxx.shop

RC MAker Product Description:
Our brand new GeoCarbon bumper with stopper for XRAY X4'24 impresses with its elegant, unobtrusive and innovative design. The plastic X4 bumper and stopper, while effective, is in our eyes not the most elegant solution to keep your chassis safe in the event of an accident.
Our design integrates the stopper under the main bumper, which connects to a lower flat section on the front bulkheads. In the event of an impact, the force is transferred through this lower part of the bulkheads, keeping the chassis in tact, with minimal impact on the bulkheads. The 4mm thick, heavy-duty brace slides over the small bumper posts, making it low enough to connect to the bulkhead. When the top plate is tightened, it clamps the entire assembly tightly in place.
When at rest, a gap of 0.1-0.2 mm remains between the bulkheads and this support to prevent rubbing and pinching. This support only becomes active in the event of a crash! This is the optimal solution to keep the chassis of your brand new X4'24 safe and looking good at the same time!
Our new Bumper Plate features three holes that allow you to adjust the body forward and backwards like the stock plates do. The integrated stopper does not move, it stays in the same place regardless of the position of the body post! Unlike other stoppers, our stopper can also stay in place when the front sway bar is removed and does not need to move when the front flex brace is used or not!
This offers you a more elegant, durable and comfortable solution than the standard parts.
Installation:
Slide the small bumper stop over the plastic posts with the notch facing down. It is a hard press fit and should snap into place and sit flush with the plastic posts.
Install the upper bumper bracket and screw it into the holes using the desired screws.
characteristics
Elegant GeoCarbon CNC machined design made from 3mm carbon
Integrated 5mm thick bumper mount to protect your chassis
Adjustable position of the body mount as included in the kit
Does not need to be removed to remove the stabilizer
Direct replacement for the standard tops and stoppers, no modifications necessary
100% made in Australia

souvent achetés ensemble

RC MAKER Xray X4-2024 GeoCarbon Front Rammer Plate - X424-CBP
Prix d'origine $21.00 - Prix d'origine $21.00
Prix d'origine
$21.00
$21.00 - $21.00
Prix actuel $21.00

RC MAKER Xray X4-2024 GeoCarbon Front Rammer Plate - X424-CBP

RC MAKER
1 est parti!

RC MAker Product Description: Our brand new GeoCarbon bumper with stopper for XRAY X4'24 impresses with its elegant, unobtrusive and innovative d...

Afficher tous les détails
Prix d'origine $21.00 - Prix d'origine $21.00
Prix d'origine
$21.00
$21.00 - $21.00
Prix actuel $21.00
RC MAKER Xray X4-2024 GeoCarbon Carbon Fiber Body Mounting Plate Rear Hard - X424-RBM
Prix d'origine $18.00 - Prix d'origine $18.00
Prix d'origine
$18.00
$18.00 - $18.00
Prix actuel $18.00

RC MAKER Xray X4-2024 GeoCarbon Carbon Fiber Body Mounting Plate Rear Hard - X424-RBM

RC MAKER
1 est parti!

RC Maker Product Description: Our brand new GeoCarbon Rear Body Mount for the XRAY X4 combines aesthetics and performance in one. The machined c...

Afficher tous les détails
Prix d'origine $18.00 - Prix d'origine $18.00
Prix d'origine
$18.00
$18.00 - $18.00
Prix actuel $18.00
RC MAKER Pro Hood Stiffener for Mugen MTC2 + Xray X4 - CBS-MTC2X4
Prix d'origine $14.00 - Prix d'origine $14.00
Prix d'origine
$14.00
$14.00 - $14.00
Prix actuel $14.00

RC MAKER Pro Hood Stiffener for Mugen MTC2 + Xray X4 - CBS-MTC2X4

RC MAKER
2 en stock

RC Maker product description Introducing our brand new 3D Pro Carbon Hood Stiffener, compatible with the original kit bumpers for the Mugen MTC2,...

Afficher tous les détails
Prix d'origine $14.00 - Prix d'origine $14.00
Prix d'origine
$14.00
$14.00 - $14.00
Prix actuel $14.00
RC MAKER Xray X4-2024 GeoCarbon Battery Holder Set - X424-BM
Prix d'origine $20.00 - Prix d'origine $20.00
Prix d'origine
$20.00
$20.00 - $20.00
Prix actuel $20.00

RC MAKER Xray X4-2024 GeoCarbon Battery Holder Set - X424-BM

RC MAKER
1 est parti!

RC Maker Product Description: Introducing our brand new GeoCarbon battery mount kit for standard size batteries for your XRAY X4'24! Our GeoCarb...

Afficher tous les détails
Prix d'origine $20.00 - Prix d'origine $20.00
Prix d'origine
$20.00
$20.00 - $20.00
Prix actuel $20.00
RC MAKER Geocarbon Carbon Fiber Rammer Plate STIFF for Awesomatix A800R - A800R-CBPS
Prix d'origine $22.00 - Prix d'origine $22.00
Prix d'origine
$22.00
$22.00 - $22.00
Prix actuel $22.00

RC MAKER Geocarbon Carbon Fiber Rammer Plate STIFF for Awesomatix A800R - A800R-CBPS

RC MAKER
2 en stock

RC Maker product description The new A800R is unique in that the rammer is attached directly to the bulkheads and relies on this mounting point t...

Afficher tous les détails
Prix d'origine $22.00 - Prix d'origine $22.00
Prix d'origine
$22.00
$22.00 - $22.00
Prix actuel $22.00
}