SkyRC ITP380 Infrared Thermometer - SK-500037
ITP380 infrared thermometer, a must-have for RC professionals to track temperatures.
Now you can measure temperature from a safe distance with the SkyRC ITP380. RC racers will no longer get burned or have air blown into their faces from RC vehicles, motors, chargers, etc. while taking measurements.
You can rely on the SkyRC ITP380 to provide accurate temperature readings from a safe distance, whether indoors or outdoors.
SkyRC has developed the ITP380 temperature gauge with an accuracy of up to 0.1°F, with object temperatures ranging from -40°F (-40°C) to 716°F (380°C).
μm accuracy
Compared to its predecessor, the SkyRC uses a classic thermal sensor in a TO-46 housing. The thermopile sensor element, consisting of 116 elements of small thermocouples with an active area of 545 μm in diameter on a silicon chip, absorbs the energy and generates an output signal. It offers near-Johnson noise-limited performance, which can be calculated by its ohmic series resistance.
Ratio of distance to measuring spot 6:1
Every infrared thermometer has a "distance to spot ratio" (D:S), which indicates the diameter of the measured area compared to the distance from the measurement object.
The 380P thermometer has a distance to spot ratio of 6:1. This means it measures a spot about an inch in diameter when it is 6 inches from the target (about 2.5cm at 30cm).
This means that the ITP380 thermometer can accurately measure targets at greater distances compared to many other thermometers;
The ratio of distance to measuring spot is crucial for the measurement! So be sure to measure with this D:S ratio.
Fast and accurate readings
Point, aim, tap: three steps to get accurate readings on the go within 1 second.
Easily selectable
Between Fahrenheit and Celsius
To switch between Celsius and Fahrenheit, simply press the UNIT button. The value is converted immediately thanks to the pre-programmed algorithm.
Low battery indicator Auto power off
The thermometer display shows when the battery is low. It switches off automatically after 60 seconds of inactivity.
The battery life is extended!
Compact design
The ultra-compact design allows you to put the device in your pocket and take it anywhere.
Impressive, stunning VA display
The inverted VA display enables an extremely high static contrast ratio for an impressive, breathtaking view. Whether indoors or outdoors, you can read the data clearly from any angle.
Versatile for hobbies, crafts and household use
Note: The ITP380 thermometer is not suitable for measuring the body temperature of people and animals.
Multiple emissivity coefficients
The emission coefficient indicates the thermal radiation. For some products, the emission coefficient varies with temperature.
As a professional infrared thermometer, the SkyRC ITP380 can be set to different emission coefficients depending on the material to achieve the best measurement.
EMISSIVITY COEFFICIENT OF THE SURFACE MATERIAL
Anodized aluminum 0.77
Plastics 0.91
Rubber, hard shiny plate 0.94
Pressed carbon filled surface 0.98
The emissivities listed refer to a temperature of 300 K as a guideline.
NIST traceable calibration
NIST-traceable calibration certifies that the applicable laboratory or manufacturer is capable of calibrating equipment to National Institute of Standards and Technology (NIST) standards and that that manufacturer's products comply with NIST-administered measurement standards. With a NIST-traceable calibration, all measurements made with a certified instrument have an unbroken measurement chain leading back to NIST-verified standards, with known and documented uncertainties for each step in the chain and a quality assurance program that addresses them.
We not only deliver products, but also trust!
Beeps for each operation and can be muted
Specifications
- height and weight
- Dimensions: 121x40x39.6mm
- Weight: 75g
- Other parameters
- Operating voltage: AAA battery x 2
- Operating current: ≤40ma@3.0V
- Operating temperature: 0-50℃
- Current consumption: ≤25ua@3V
- Precision:
- -40℃-0℃ +/-1.5℃
- 0℃-380℃ +/-1.5℃
- -40℉～32℉ / ±3℉
- 32℉～716℉ / ±3℉
- Infrared emission frequency adjustable range: 0.01-1
