Products with “in stock” status will be shipped the same day if ordered by 2 p.m.
Information
If you have any questions about the product or detailed information about the ordering process. Call us!
Telephone: +41 44 500 84 66
Email: support@rcxx.shop
Schumacher Cat L1R - 1/10 4WD Buggy Kit
We are pleased to introduce the fantastic 1/10 4WD Competition Off Roader CAT L1R.
The Schumacher CAT L1R brings the latest developments from the Schumacher International Racing Team to build another sensational 4WD buggy. A buggy that can take you to the top of the podium. The L1R features improved suspension geometry, reduced weight, better durability and a new JConcepts body. The L1 buggies have already won the European EOS Championship, the British BRCA Championship and the ROAR Carpet Championships in the USA. The L1R is a fantastic looking buggy that will be a winner on any type of track.
Join the winning team. #Schumacherfamily and drive a CAT L1R. A pure beast.
Check out the 26 NEW FEATURES below.
New - Front hub carriers with screw-on steering plates allow adaptation to all track conditions.
New - Countershaft and slip plates with M4 counter nut. Lightweight, double-coated slip clutch with Ultra Fine adjustment spring. The new drive interface for the slats and gears enables more precise/concentric running and improves efficiency.
New - Rear suspension geometry provides greater stability and improved rear traction. This new geometry ensures that the car lies flatter in the corner while maintaining grip in the corner.
New - Wider suspension brackets.
New - Rear hub carrier with larger outer hub bearings and multi-stage camber adjustments. 10 camber handlebar positions on a plate with washers to adjust vertical height.
New - Longer rear U/J steel drive shafts.
New - Rear crash bar.
New - Hard anodized -1.5mm width, 12mm wheel hex.
New - Suspension pin inserts for increased precision and durability. Steel top hat bushings for longer lasting pivots and a larger span for bearing range of effective pivot pin length.
New - JConcepts body design. Popular and well-known style that offers a great balance of steering and stability.
New - Shorter front U/J drive shafts. More forward momentum and responsiveness.
New - Longer front diff exits.
New - Stronger front upper gear housings.
New - Updated front control arms.
New - ball socket and 5.5 mm ball pin for the steering.
New - Front inner 3.5mm pivot pin with raised position. For more forward momentum and agility.
New - Low CofG and center mounted motor mount. This allows full height shorty lipos to fit in the new front mounting position. The lipo position is 9mm further forward than the previous model.
New - Hard anodized 2mm 7075-T6 aluminum chassis. Pockets for easy radio access with removable S2 shells. The new, slim shape of the light and flexible chassis allows the weight to be shifted backwards when cornering without the chassis touching the track.
New - Molded composite sidepods. The flex is retained with these soft, high-quality molded parts.
New - Easily accessible LiPo holder with positioning moved further forward.
New - 3 pieces of top decks.
New - Longer rear shock shaft.
New - Rear 1.8mm stabilizer bar to adapt to the new geometry, included.
New - Transmission Diff Pulley Housing with thicker planetary gear shim for better durability. Improved efficiency of the differential in the barrel.
New - Molded shock absorber pistons and bushings.
New - 'S2' shock mounts. To adapt to the new geometry at the front and rear.
Not forgetting all the usual features that have made this buggy one of the best on the planet!
- Large-volume shock absorbers with large-volume "CORE-RC" springs, titanium nitride shafts, double O-ring seal. - Ball-bearing two-piece damper cap for easier assembly, maintenance, venting and reduced weight. - 1.4 mm and 1.8 mm stabilizers for the front. - Front pivot strap inserts for front track width adjustment. And 8°, 10°, 12° tilt adjustment at the front. - Lightweight front shock tower cover to protect your vehicle and track from damage. - Threaded spring plate for better positioning. - Includes 31 precision ball bearings. - FAB (Front Adjustable Brake System) with new 'S2' friction pads. - Lightened side transmission gears. - Rear ultra-low wing mounts. - Interchangeable rear track inserts including 4, 3.5, 3, 2.5, 2, 1.5, 1 and 0.5 degrees. - Small gear differentials with low rotating mass. Features 3-position height adjustment to accommodate drive shaft immersion and varying track conditions. Shim design to increase durability and consistency from race to race. Solid cross pin for mounting 2 planet gears. - Medium flex rear axle - Shorty and saddle compatible. - 5mm thick durable polyurethane drive belts. - Cable management system. - Aluminum and carbon fiber floating servo mount. - Aluminum tie rod with multiple Ackerman positions.
